Investigation of sulfonated poly(ether ether ketone sulfone)/heteropolyacid composite membranes for high temperature fuel cell applications

The sulfonated poly(ether ether ketone sulfone) (SPEEKS)/heteropolyacid (HPA) composite membranes with different HPA content in SPEEKS copolymers matrix with different degree of sulfonation (DS) were investigated for high temperature proton exchange membrane fuel cells. Composite membranes were characterized by Fourier transfer infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR band shifts suggested that the sulfonic acid groups on the copolymer backbone strongly interact with HPA particles. SEM pictures showed that the HPA particles were uniformly distributed throughout the SPEEKS membranes matrix and particle sizes decreased with the increment of copolymers' DS. The holes were not found in SPEEKS‐4/HPA30 (consisting of 70% SPEEKS copolymers with DS = 0.8 and 30% HPA) composite membrane after composite membranes were treated with boiling water for 24 h. Thermal stabilities of the composite membranes were better than those of pure sulfonated copolymers membranes. Although the composite membranes possessed lower water uptake, it exhibited higher proton conductivity for SPEEKS‐4/HPA30 especially at high temperature (above 100 °C). Its proton conductivity linearly increased from 0.068 S/cm at 25 °C to 0.095 S/cm at 120 °C, which was higher than 0.06 S/cm of Nafion 117. In contrast, proton conductivity of pure SPEEKS‐4 membrane only increased from 0.062 S/cm at 25 °C to 0.078 S/cm at 80 °C. At 120 °C, proton conductivity decreased to poor 0.073 S/cm. The result indicated that composite membranes exhibited high proton conductivity at high temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1967–1978, 2006     

A high-gain porous silicon metal–semiconductor–metal photodetector through rapid thermal oxidation and rapid thermal annealing

2 tungsten lamp at 1.83 mA excited by a 0.85-mW 675-nm laser diode. We also demonstrate that the dark current could be greatly reduced through rapid thermal oxidation and rapid thermal annealing. Received: 4 August 1997/Accepted: 28 May 1998     

线性时滞系统实用稳定性的一个简明判据

利用比较的方法，获得了线性时滞系统实用稳定性的一个简单判定定理．     

激发态卟啉衍生物研究(Ⅶ)——取代基对卟啉—硝基苯化合物发光特性的影响

本文报导共价链相连的X-P-Y“三合板”型化合物在二甲基甲酰胺(DMF)和苯溶液中的发光特性.结果发现:引入取代基X=Cl—,CH3O—和Y=苯、硝基苯对中心卟啉的吸收和荧光光谱均无明显影响,仅其峰值频率将因溶剂不同而有所偏移.此外,由Cl—取代的卟啉—苯的荧光强度总比CH3O—取代时高;若将Y取代基由苯改换为硝基苯时,将使CH3O—P—Y化合物的荧光增强,但在Cl—P—Y化合物中则出现相反的趋势.不论在何种化合物中,在Y取代基中的苯环上引入NO2—基后,均可使其消光系数减小,而且当硝基在邻位取代时,这一效应更为显著.所有这些变化规律均不因溶剂不同而异.如果我们认为X—P—Y化合物的发光强度变化和其中心的卟啉大环上的π电子云密度偏移有规律性的关联,那么上述的一些取代基效应是可以理解的.进而,我们认为:本文所报导的事实将有助于充实巧妙设计高效利用太阳能的分子体系的科学依据.     

氯离子柱撑水滑石共沉淀法合成反应动力学

根据氯离子型层状复合氢氧化物(LDH-Cl)制备过程中溶液浓度变化的监测结果和不同反应进程时产物的EDS、IR、XRD、TEM、TG-DTA表征结果,研究了合成LDH-Cl的共沉淀反应动力学特征及机理.实验结果表明, LDH-Cl的生成符合多核层表面反应动力学模型;反应过程中LDH的晶胞参数c从2.421 nm变为2.399 nm,通道高度h由0.3321 nm减小为0.3228 nm,粒子直径Da由6.40 nm增大为15.16 nm, Dc由7.43 nm增大到10.93 nm,纵横比由0.86增大为1.39; IR和TG-DTA特征变化表明了层板对阴离子作用的强度和层板的结构稳定性随反应进程而提高.     

乙酰化气相色谱法快速测定皮革及皮革制品中的五氯苯酚残留量

在前人工作基础上，对皮革及皮革制品中五氯苯酚残留测定方法经试验改进，增加浓硫酸净化步骤，并以艾氏剂作为标物，乙酰五氯苯酚用填充气相色谱测定。